Pressure washing is a great way to give your property a deep cleaning. Not only does it prevent damage to your property, it’s also a safer way to clean up residue on surfaces. Depending on the type of pressure washer that you choose, you can choose between hard and soft-spray nozzles.
Commercial power washers
If you’re working in a commercial setting, it is vital to choose the right type of pressure washer for your specific needs. Those machines that operate at high pressures and have large GPM ratings are ideal for commercial settings. They can complete the same job more quickly than similar machines that don’t have as much power. Moreover, these washers can be connected to multiple hoses for even greater productivity.
When used properly, a commercial power washer can clean the property in a spotless manner. However, be cautious about the chemicals used. You don’t want to use harsh chemicals as they can damage paint and wooden surfaces. You should also consider the surface compatibility of the chemical agent. There pressure washing company are specific cleaners for concrete, wood, and driveways.
Cold-water pressure washers
Cold-water pressure washers use cold water instead of warm water to clean a variety of surfaces. While hot water is required for some maintenance operations, a cold-water pressure washer can safely remove dirt and mud from a wide range of surfaces. While this type of cleaning solution isn’t as powerful as hot water, it is still more effective than a normal pressure washer for many tasks.
Cold-water pressure washers come in a variety of models. The Eagle Series Direct Drive 4.0 @ 4000 is an inexpensive entry-level model, while the Pro Max HP Series 4.5 @ 6000 offers 50% more pressure. There are also specialist models of cold-water pressure washers available.
Hard-spray versus soft-spray nozzles
When pressure washing, a difference in nozzles can make a world of difference. Choosing the right one is essential to getting the job done right. Hard-spray nozzles are used for tougher stains and dirt, while soft-spray nozzles are used for delicate surfaces such as windows and patios.
The first difference between hard-spray nozzles and soft-spray nozzles is the pressure they can produce. Pressure washing uses high-pressure water to remove dirt and grime, but the pressure it produces can damage most surfaces. If you’re tackling a tough stain on concrete, you should use a pressure washer with a 4000 PSI or higher.
Size of the tank
When buying a pressure washing system, you should consider the size of the tank. Some pressure washers have tanks that can hold up to 500 gallons of water. The size of the tank should be dependent on the type of work you will be doing. Purchasing a 500 gallon tank may not be practical for small jobs, so it is important to use your best judgment.
You can determine the size of the tank by looking at the banjo fitting on the water tank. This will allow you to connect a threaded pipe or PVC to the tank. Once the pipe is connected, teflon tape should be used to secure the pipe. You should then connect the barb connector and hose to the pressure washer feed line.
PSI produced
When pressure washing, it’s important to select the right PSI for the type of surface and stain. In most cases, the higher the PSI, the more power the water will exert. However, too much pressure can do more harm than good. Hence, it’s best to avoid using a high PSI on a porous surface. A recommended PSI range is between 2300 and 3000 pounds per square inch.
The pressure produced by a pressure washer is measured in PSI (pounds per square inch). It’s important to understand how this measurement works, as it’s the basis for the quality of cleaning power. PSI stands for pounds per square inch, and it’s commonly used in the industry for a variety of purposes.